Structural and physical properties of Mg3−xZnxSb2 (x=0-1.34)

The Mg_3−xZn_xSb₂ phases with x=0-1.34 were prepared by direct reactions of the elements in tantalum tubes. According to the X-ray single crystal and powder diffraction, the Mg_3−xZn_xSb₂ phases crystallize in the same P3¯m1 space group as the parent Mg₃Sb₂ phase. The Mg_3−xZn_xSb₂ structure is different from the other substituted structures of Mg₃Sb₂, such as (Ca, Sr, Ba) Mg₂Sb₂ or Mg_5.23Sm_0.77Sb₄, in a way that in Mg_3−xZn_xSb₂ the Mg atoms on the tetrahedral sites are replaced, while in the other structures Mg on the octahedral sites is replaced. Thermoelectric performance for the two members of the series, Mg₃Sb₂ and Mg_2.36Zn_0.64Sb₂, was evaluated from low to room temperatures through resistivity, Seebeck coefficient and thermal conductivity measurements. In contrast to Mg₃Sb₂ which is a semiconductor, Mg_2.36Zn_0.64Sb₂ is metallic and exhibits an 18-times larger dimensionless figure-of-merit, ZT, at room temperature. However, thermoelectric performance of Mg_2.36Zn_0.64Sb₂ is still poor and it is mostly due to its large electrical resistivity.     

Water-soluble stilbene dendrimers

The third generation of novel photo-responsive water-soluble stilbene dendrimer (trans- and cis-G3 WSD) undergoes unusual one-way trans-to-cis isomerization to give 100% of cis isomer at the photostationary state on UV irradiation in water.     

Isomorphic electron orbitals for vibronic flexibility in a cyclopropenyl radical molecular device

Summary The vibronic character of this molecular device has been studied using isomorphic electron orbitals. The leading role of the softest vibrational mode for the electron transport process is stressed by the quantum mechanical treatment of the rearrangement operator. The theory was used to investigate the possible function of the soliton valve, which has been suggested as a switching tip. The electronic flexibility of the cyclopropenyl radical with respect to molecular vibrations, which is important for the function of the molecular device, is well characterized by the hardness and softness of the electron structure in terms of the orbital energy-occupation number correlation diagram.     

Asymmetric michael addition of aromatic thiols to 2-cyclohexenone and maleic acid esters via formation of crystalline cyclodextrin complexes

The asymmetric Michael addition of aromatic thiols to 2-cyclohexenone and maleic acid esters has been carried out by utilizing their crystalline cyclodextrin complexes suspended in water. The best chiral induction, 30% enantiomeric excess (ee), was achieved in combinations of 2-cyclohexenone and octyl maleate with the crystalline -cyclodextrin complex of benzenethiol (method A) to afford (S)-3-phenylthiocyclohexanone and (S)-octyl-2-phenylthiosuccinate, respectively, whereas the reaction of benzenethiol with 2-cyclohexenone included in -cyclodextrin (method B) inversely induced the chiral recognition to give the (R)-adduct with 4–9% ee.     

Asymmetric halogenation and hydrohalogenation oftrans-cinnamic acid in crystalline cyclodextrin complexes

Asymmetric halogenation and hydrohalogenation oftrans-cinnamic acid have been achieved in the microcrystals of cyclodextrin complexes. The bromination of the organic acid in the cavity of -cyclodextrin gave theerythro-dibromide in 40 % optical yield which was much larger than that from the resolution treatment of the racemic dibromide with -cyclodextrin and the absolute configuration was opposite in sign. The asymmetric induction in the gas-solid reaction was not due to optical resolution but to the reaction itself which was influenced by the chiral frame of cyclodextrin. The reaction shows the molecular size effect that the acid in the cavity of -cyclodextrin reacted with smaller hydrogen bromide but did not with larger bromine and chlorine. In contrast, the guest molecule in the wider cavity of -cyclodextrin reacted with bromine and chlorine as well as hydrogen bromide. The stereospecificities of the gas-solid halogenations of the acid in -cyclodextrin were similar to those of the both reactions in the solid state and in carbon tetrachloride solution without -cyclodextrin: bromination of the acid yieldederythro-2, 3-dibromo-3-phenylpropionic acid stereospecifically in 100 % in three different conditions, but chlorination gave an excess ofthreo-2, 3-dichloro-3-phenylpropionic acid to theerythro-isomer in 7287 % yields.     

Radioisotopes of thirteen elements in intertidal coastal and estuarine sediments in the Irish Sea

A survey has been carried out of⁴⁰K,⁶⁰Co,⁹⁹Tc,¹⁰⁶Ru,¹²⁵Sb,¹²⁹I,¹³⁴Cs,¹³⁷Cs,¹⁵⁴Eu,²²⁶Ra,²²⁸Ra,²³⁷Np,²³⁸Pu,^239,240Pu,²⁴¹Pu,²⁴¹Am,²⁴²Cm, and^243,244Cm activities in sediments from the Irish Sea. Several of these radionuclides were measured independently at two separate laboratories to enable the intercomparison of the results produced. The comprehensive data set generated allows the present spatial distributions of these radionuclides in coastal sediments to be examined in relation to sediment textural characteristics and by comparison with earlier survey, enables the temporal trends in their activities to be determined. In general all artificial radionuclides showed lower activities in sediments in response to falling discharges from Sellafield and relationships with either grain size, distance from Sellafield or both. Isotope ratios were similar to cumulative weighted activity ratios rather than present day values due to sediment mixing. Pu levels supplied evidence for the lag in response of sediment deposits with increasing distance from Sellafield due to sediment transport.     

New formation of a 1,3-dipole in the reaction of adamantanone azine with triazolinediones: In connection with reactivity toward singlet oxygen

Tricyclo[3.3.1.1]decanone azine ( adamantanone azine ) reacts with 4-substituted 1,2,4-triazoline-3,5-diones under elimination of diazo adamantane to give a 1,3-dipole ( “azomethinimine” ), which on treatment with dipolahophiles affords the [ 2 + 3] -cycloadducts. The reaction is compared with singlet oxygen oxidation.     

Important role of molecular permanent dipoles of the Alq3/Al interface studied from first-principles

We have studied the atomic geometries and electronic properties of the tris-(8-hydroxyquinoline) aluminum (Alq₃)/Al interface using density functional calculations. The calculated interface dipoles agree reasonably well with the experiments and the origin of the interface dipole formation mainly comes from the alignment of the permanent dipoles of Alq₃ molecules. The HOMO levels of the Alq₃ molecules significantly depend on the orientation of the molecular permanent dipoles and the interfacial gap state observed by experiments is ascribed to the co-existence of the two orientations of the molecular dipoles.     

Collection of mercury from artificial sea-water with activated carbon

Nanogram amounts of mercury(II) and methylmercury in artificial sea-water containing mineral acids as preserving reagents were shown to be collected quantitatively with activated carbon. Mercury concentrated on activated carbon was determined directly by combustion, trapping on gold and electrothermal atomic-absorption spectrophotometry. The activated carbon was purified by heating at 350 degrees for 2 hr. Sulphuric acid and hydrochloric acid were purified by treatment with activated carbon. Interference from iodide was eliminated by using a carbonate buffer wash before the atomic-absorption measurement. Less than 4 ng of mercury in 200-300 ml of artificial sea-water, whether acidified or not (with sulphuric, hydrochloric or nitric acid), was satisfactorily collected with 100 mg of activated carbon. Mercury was also collected quantitatively after oxidative treatment of artificial sea-water.     

Synthesis, stereochemistry, and circular dichroism of optically active o-substituted diphenyl sulphilimines and related compounds

Optically active o-substituted diphenyl N-substituted sulphilimines are readily synthesised by the reaction of the corresponding sulphides and t-butyl hypochlorite in the presence of l-menthol and amide anions. (−)-N-p-Tolylsulphonylsulphilimines (1, 2) obtained were converted to the corresponding (−)-N-unsubstituted sulphilimines (8, 9) by treating them with concentrated sulphuric acid. When (−)-S-o-anisyl S-phenyl N-(unsubstituted) sulphilimine (8) was treated with acylating agents or acrylonitrile, the corresponding optically active (−)-N-substituted sulphilimines were prepared with complete retention at sulphur. The absolute configuration of (−)-S-o-anisyl S-phenyl N-p-tolylsulphonylsulphilimine (1) was determined by converting it to (+)-S-o-anisyl sulphoxide (17). CD curves of (−)-o-substituted diarylsulphilimines exhibited a negative Cotton effect at around 270–285 nm, which was assigned to (S)-configuration at sulphur by comparing with the analogous sulphoxides. The substituent on the imino group of the sulphilimine gave no appreciable effect on the CD behavior and the lack of substituent effect was considered to be due to the semi-polar character of the S(IV)-N bond. Unusual effect of o-methoxy group on the CD curves was discussed in connection with solvent effect. Mechanism of this asymmetric synthesis has been investigated, and it has become apparent that the diastereomeric menthoxysulphonium chloride was an excess of (RR)-configuration was formed initially and the amide anion attacks the S atom of the salt with net inversion.